So i recenty had an Asus f3jp laptop and i had to put a new image of windows 7 on it. So I went about this as I usually do installed the OS and it was all good. Then I downloaded all the drivers from the Asus support site and installed them. I checked device manager and there were still 8 devices missing.

If you do not know how to find drivers check out find missing drivers.

I checked the first devices hardware id and it was this: ACPI\IFX0102\4&305F7111&0
After alot of googling it told me that the device was an
Intel(R) 82801GBM (ICH7-M) LPC Interface Controller – 27B9

This did not fix the problem but it did resolve about five others, so i had made a dent at least.

Next was:

Name: Ricoh Memory Stick Host Controller

10. Bluetooth.
Appeared in Device Manager as

So this was fixed by downloading the file


After all this I still had the original device with instance id of: ACPI\IFX0102\4&305F7111&0

I could not find a suitable driver anywhere for this and ended up giving up on it. If you find out what the device is and where to find the driver for it please comment your solution on here.


How to find if you have missing drivers:

Read More →
Replies: 0 / Share:

This will only work with a seagate HDD.
You will need Seatools by seagate to do this tutorial.

Seatools is a utility brought out by seagate specifically for seagate hard drive testing. This is a useful tool when you are diagnosing a fault in your PC because it not only has a version that will run inside of your OS(eg.Windows or Linux), but has a boot-able version that you can burn to a disk and run at start-up. So say your computer has totally died and it will turn on but will not get to your OS then you can boot to the Seatools boot-able disk and run the tests to see if your hard drive is your problem.
You can use Seatools for:

  • Writing zero’s
  • S.M.A.R.T Testing
  • Short drive self test
  • Get drive information
  • Updating firmware
  • Short/Long tests

Writing zeros

Writing zero’s means that zero’s will be written to every part of the HDD. This tool can be useful if you had sensitive or confidential information on your HDD and you did not want anybody to be able to recover this data. Just deleting files and folders leaves traces of the information behind and it can still be recoverable, so if you write all zero’s to the disk that will mean that all the old data has been written over and make it harder to recover.

S.M.A.R.T Test

S.M.A.R.T(Self-Monitoring, Analysis and Reporting Technology) is the technology used to monitor and detect hard drive defects and malfunctions and warn you that your HDD is getting worn out and you may need to replace your hard drive or risk losing your data if your hard drive fails. S.M.A.R.T test is good to do to predict possible hard drive failure in the near future.

Short Drive Self Test

The DST(Drive self test) is a test that is built into the hard drives firmware. Because it runs the built in test that is on the seagate hard drives firmware it may be outdated and not as effective as the tests that are part of the Seatools program. In most cases this will determine if there is a failure on the disk.

Get drive information

This option will output information on the seagate hard drive that is selected such as model number, serial number, cache size, current drive temperature and other useful information. This can come in very handy when the sticker off the hard drive has been damaged some how and you can no longer read the serial number and part number when applying for a warranty repair.

Update firmware

Updating firmware is updating the program that is on the HDD.

Short/Long tests

These are probably the most useful tools that are included in Seagate’s Seatools program. The short test will pick up any major failures in your hard drive. If after the short test comes back that there are no problems and you still suspect the hard  drive of being the problem then run the long test. The long test can take 4 hours plus to run though.

Read More →
Replies: 0 / Share:

Updates are additional parts to the software that stop bugs or glitches in windows or to make it run better.

You update your windows by going to start > all programs > windows update.

This opens the windows update console where you can check for updates, download them and install them.

Updating windows is essential to keeping your operating environment secure and also in stopping crashes and patching bugs in the operating system.

Watch this video below to see how to update windows.

Read More →
Replies: 0 / Share: